By TDMI Training & Nearby Electrician
A contractor orders copper PV cable. The reel arrives, the invoice says “solar cable”, and the team is ready to pull it onto the roof. At that moment, one question can save everyone a costly return visit. Can the supplier show that this exact reel contains the conductor specified for the job?
It has come to our attention that cable is being offered to South African installers as suitable for DC solar work even where its conductor material is unclear. We have a similar concern about earth rods sold for electric fencing finding their way into electrical installations. Both problems can start at the trade counter, long before a registered person is asked to sign the Certificate of Compliance (CoC).
Tinned copper and copper-clad aluminium are different products
Tinned copper has copper strands with a thin coating of tin. The strands can look silver, and genuine tinned-copper cable is specifically called for in South African PV project specifications. Copper-clad aluminium (CCA) has an aluminium core beneath a layer of copper. It can look like copper from the outside. Colour alone tells the buyer very little about what runs through the length of the cable.
For PV string wiring specified as copper, buy PV-rated cable with a documented copper conductor. Reject substitutions involving aluminium, tin-coated aluminium, CCA or another composite conductor. If a salesperson describes a cable simply as “tinned”, ask them to finish the sentence. What metal has been tinned? Then ask for the manufacturer’s datasheet and match its product code to the reel. Check the conductor size, DC voltage rating and suitability for outdoor exposure as well.
What can go wrong on the roof?
An aluminium-core substitute can have higher resistance than the copper conductor of the same size used in the design. At the same current, higher resistance means more voltage drop and more energy lost as heat. There is also a separate risk at the termination. A connector intended for copper strands may make an unreliable connection with a substitute conductor. Heat can then concentrate at a single contact, damaging the connector and surrounding insulation. A deteriorating DC connection can arc and start a fire.
The inverter may start normally on commissioning day. That gives the customer no assurance about how an unsuitable termination will perform after months on a hot roof. By the time the problem becomes visible, the contractor may have to trace every run supplied from that reel, arrange access, replace cable and connectors, and retest the work.
An electric-fence earth spike needs its own check
An earth rod is another purchase where a familiar appearance can hide a poor substitution. For electrical installations, SANS 10142-1 clause 6.12.2 refers to SANS 1063 for the electrode and SANS 10199 for its installation. A rod sold for an electric fence needs evidence of suitability for the proposed AC or solar electrical installation before anyone accepts it for that purpose.
Be precise when ordering a 16 mm rod. Where the job calls for a nominal 16 mm earth rod, reject a lighter fencing spike offered in its place. Check whether “16 mm” on the listing refers to the rod body or an M16 thread. Manufacturers list these dimensions separately. South African project specifications also distinguish nominal diameter, manufacturing tolerances and, in some cases, rods for pre-drilled holes. That makes a blanket claim that every electrode measuring under 16 mm is prohibited too broad. Ask for the exact rod model, its dimensions, material or coating, and evidence of SANS 1063 compliance.
If you buy it for the job, you have a responsibility too
Suppliers, describe what you are selling. Put the conductor material and product code on the quotation. If a customer asks for copper PV cable and your stock has an aluminium core, say so before the sale.
Contractors and buyers, specify the material in writing and check what arrives. If the reel, invoice and datasheet cannot be matched, hold the stock back. If the client bought the materials, apply the same checks before your team uses them. South Africa’s Electrical Installation Regulations cover those who authorise or require installation work as well as those who carry it out. Regulation 5 also requires compliant components and identifiable proof of compliance or certification available from the manufacturer or supplier.
Registered persons, where suspect stock has already been used, identify the affected circuits and have the materials verified. Where the installation fails to comply, require correction before issuing the CoC. Regulation 9 places the decision to certify with the registered person following inspection and testing. A supplier’s verbal assurance cannot discharge that duty.
The easiest time to challenge an unsuitable reel is while it is still on the counter. Ask what is inside it, ask for the evidence, and make sure the product you take to site is the one you agreed to install.




